PPDCM80 - Digital Clamp Meters

$156.90
In stock
1
Product Details

Introduction

The Power Probe Digital Clamp Meter is an 80amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter’s diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.


Features

- Voltage: AC 600V DC 600V
- Current: AC 80A DC 80A
- Display 4000 counts
- Jaw Opening 24mm/0.9”
- Auto & Manual Ranging
- Auto Power Off
- Non-Contact Voltage Detector
- Diode Open Voltage 3.2V
- Continuity Buzzer <50Ω
- Data Hold
- Large LCD Display Backlight
- Work Light

- Low Battery Display

Auto-range

Yes

Overload protection

CAT III 600V

Max. voltage between ter- minals and earth ground

600V DC or AC

Operating altitude

≦2000m(6500ft.)

Display

3 3/4 digit LCD display

Max. reading

4000

Polarity Indication

display automatically shows “-”

Over-range Indication

display shows “OL” or “-OL”

Power

3 x 1.5V AAA Batteries

Low Battery Indication

“ ” will appear on the display.

Temperature coefficient

less than 0.1 x accuracy/°C

Operating temperature

18°C~28°C (64°F~84°F)

Storage temperature

-10°C~50°C (14°F~122°F)

Operating Humidity

<80%

Operating Environment

Indoor Use

Pollution degree

2

Dimensions

195x80x45mm

Weight

approx. 195g (including batteries)



Save this product for later
Menu